|
|
|
|
Brushless Motors |
|
|
- Brushless DC motors up to 150 watts output power for variable speed drives with a choice of external or integrated drive electronics
- Low cost Brushless dc motors in NEMA 23 and 34 frame sizes with matched drives and peak torque ratings up to 3.2Nm
- Brushless AC servo motors for optimum dynamic performance in frame sizes from 40 to 145mm square and peak torque ratings up to 25Nm
- Choice of integrated or external motion controllers
- Optional gearheads with choice of precision grades
|
|
|
|
Stepper Motors |
|
|
- 3.6°, 7.5° and 15° permanent magnet stepper motors from 15 to 60mm diameter
- Linear Actuators from 26 to 80mm diameter with thrusts up to 88 N
- 1.8° hybrid steppers in standard NEMA 16, 17, 23 and 34 frame sizes
- High performance hybrid options utilising high energy magnets
- Hybrid motors with optional encoders and parking brakes
- Optional drives, motion controllers and complete turnkey systems
- Optional gearheads with choice of precision grades
|
|
|
|
Reversible AC Synchronous Motors |
|
|
- Fixed speed 500, 250 and 60RPM motors for instrumentation, visual effects and display drives
- Output torque ratings up to 0.22Nm
- Optional gearheads for increased torque at reduced operating speed
- CW and CCW operation
|
|
|
|
DC Servo Motors |
|
|
- Instrument ironless rotor dc servo motors from 8mm to 66mm diameter with output power ratings up to 20 watts
- Industrial dc servo motors up to 84mm diameter with power ratings up to 400 watts
- Optional dc tachogenerator, incremental encoders and parking brakes
- Optional drives, motion controllers and complete turnkey systems
- Optional servo gearheads with choice of precision grades
|
|
|
|
Spur and Planetary Gearheads |
|
|
- Precision spur gearheads from 30mm to 76mm sq flange
- Up to 8Nm peak torque capacity using spur gear technology
- Planetary gearheads from 43mm to 180mm diameter
- Choice of precision grades with backlash down to 1 arc minute
- Up to 1200Nm peak torque capacity using planetary gear technology
- Suitable for use with a wide range of motors for an optimum geared motor combination
|
|
|
|
Rotary and Linear Encoders |
|
|
- A wide range of robust industrial Leine & Linde incremental rotary encoders providing up to 5,000 pulses per revolution with differential outputs and index marker as standard.
Special line counts are easily accommodated
- High resolution linear encoding systems providing 0.1 micron resolution
- High resolution rotary encoding systems provide 7,200,000 cpr Leine & Linde single turn absolute encoders up to 13 bit resolution
- 25 bit multi-turn absolute encoders with 13 bit single turn resolution
- Parallel, serial and Bus interface options
|
|
|
|
Custom Control Systems |
|
|
- Fully pre-wired systems based on ‘in-service proven’ modular technology customised to exact user requirements
- Multi axis stepper control systems provide up to 250 watts per axis
- Multi axis dc servo control systems up to 400 watts per axis
- Multi-axis brushless servo systems up to 5 kW per axis
- Hybrid systems combining stepper, dc servo and brushless technology
- Systems based on a flexible motion controller suitable for use with stepper and servo motor based drives simplify motion control software
- In-house EMC test facility ensures compliance with current legislation
|
|
|
|
Fieldbus Gateways |
|
|
- The Unigate series of fieldbus gateways take any conventional RS232 / RS485 / RS422 serial interface and provides an interface to any of the major fieldbus's
- Supported Fieldbus types: Profibus, Devicenet, Arcnet, Ethernet (10 base T and 10/100 Base T), Canopen, Interbus, LONworks, MPI
- Housed, Din rail mounted and IC formats available
- Common RS formats easily configurable using free of charge WINGATE software, standard formats such as modbus, modbus RTU, transparent, RS232 and RK512 fully supported
- Script gateways allow simple data manipulation to be catered for
|
|
|
|
CAM Controller data |
|
|
- Full range of electronic CAM control modules providing high accuracy CAMS with deadtime compensation and easily changed CAM profiles
- Easily configured either using operator keypad or via free of charge WINLOC software
- Wide range of mounting configurations, including housed, din rail mounting, modular and integrated encoder / controller versions
- Absolute and Incremental encoder options
- Fieldbus compatible versions available
|
|
|
|
Technical Manual Library |
|
|
- Manuals for Mclennan motion control products provide
- Detailed specification of each unit
- Connection details
- Optional motherboard information for range of Eurocard modules enabling connections to be made via solder-free screw terminals
- Installation guides
- Operator instructions
|
|
|
|
|
|
|
