Suitable for use with the Premotec CL29 series motors, the OS30 gearbox series has a rated torque up to 0.2Nm, a choice of 12 or 24Vdc motors and a wide range of standard gear ratios. The OS30/CL29 geared DC Servo motor series provides a compact drive for a wide range of instrumentation applications.

• Features include -
• Low inertia ironless rotor servo motor provides rapid response to control signal changes
• Precious metal commutation ensures high efficiency and excellent servo control
• Metal geartrain for high reliability
• 6 ratios from 15:1 to 500:1
• 5mm diameter output shaft
• Choice of 12 or 24 Vdc motor options with wide range of standard gear ratios
• Low unit cost ideal for small and medium size original equipment manufacturers

Suitable for use with CL40 series motors, the OS38 gearbox series have a rated torque up to 0.7Nm, a choice of 12 or 24Vdc motors with wide range of standard gear ratios. See the OS38 series datasheet for the full specification.

• General specification as the OS30 series (above) -
• 9 ratios from 6:1 to 900:1
• 6mm diameter output shaft
• Output torque from 0.07Nm to 0.7Nm

The P23-1 gearhead utilises an all steel planetary construction to provide an outstanding torque transmission capability for a unit of such compact dimensions. A the high precision construction with controlled backlash down to less than 1° makes the P23 series units ideal for high accuracy miniature servo positioning systems. Suitable for use with either M23 or M28 series motors where peak torque ratings up to 70Ncm may be achieved.

• Features include -
• 11 ratios in the range 3.71:1 to 1526:1
• 6mm diameter output shaft
• Operating temperature range -30 Deg C to +10O Deg C
• Metal housing with shielded ball bearing
• 70% efficiency typical

The P30 series is a precision planetary gearhead featuring controlled backlash to less than 1° and a peak torque capability to 6Nm. In standard execution the 30/1 series utilises a combination of plastic first stage and metal final planetary gear stages. For heavy duty applications the P30-1S series utilise steel gear stages throughout the planetary unit. The P30 series is suitable for fitting to M28 and M35 series dc servo motors and provide a combination of high torque and smooth running ideally suited to high performance servo applications which require a combination of high dynamic operation and compact overall dimensions

• General specification as the P23 series (above) -
• Output torque from 6.5Ncm to 450Ncm
• 8mm diameter output shaft

MRIG geared dc servo motors are ideally suited to light industrial applications where a combination of high strength and accurate control is required. The motors utilise a skew wound ironless rotor construction and high strength magnets to provide smooth low speed operation with the consequential benefits of low running noise and long life. A wide range of options, particularly on the more powerful M66 series motors enable the design engineer to select the optimum feedback device such as a dc tachogenerator for analogue control or an incremental encoder when digital control of speed or position is required. Suitable for the 40mm diameter Premotec 9904 120 series motors or 66mm diameter M66C motors.

• Features include -
• 8 ratios in the range 5:1 to 500:1
• 8mm diameter output shaft

The IP series gearheads have been designed to provide long life in industrial automation, industrial, scientific and process control applications that require repetitive cycling featuring high dynamics, accurate velocity or positional control. Advanced manufacturing techniques, combined with a design focused on the needs of state of the art motion control has resulted in a combination of optimised performance characteristics combined with economic prices. Suitable for use with M35 and M66 series motors

• Features include -
• 14 standard ratios from 4:1 - 1000:1, other ratios to order
• Torque range 3.3Nm - 40Nm, with a x2 factor peak torque
• Suitable for use with both servo and stepper motors
• Typical backlash < 30 arc mins.
• Standard 3/8in and 0.5in output shafts, 8mm and 12mm to order
• Planetary construction for high torque and compact dimensions
• Standard NEMA frame sizes
• Simplefit mounting kit option to fit most motors

The IP57 series of planetary gearboxes are suitable for use with the M66 series DC Servo Motors resulting in a small size high torque servo drive. Addittionally the M66 motors may be fitted with either a parking brake, incremental encoder or DC tachogenerator. Ideal for packaging systems, conveyors and light industrial applications. Rated torque up to 19Nm.

• General specification as the IP57 series (above) -
• Low cost due to advanced design and manufacturing techniques
• Controlled backlash for accurate positioning
• High continuous and peak torque capacity
• Ironless rotor low inertia servo motor including encoder and tacho options
• Wide range of standard gear ratios
• Ideal for packaging systems, conveyors and general purpose light industrial systems