Fiber W01 and W02 Gearboxes fitted with the Fiber M41 and M51 series uni-directional AC Synchronous Motors provide a wide range of speed options. The motors, when specified with the correct pinion option, are simply mounted to the gearbox by means of a spring clip resulting in a low cost AC Synchronous geared motor with rated torque up to 90Ncm. Standard gear ratios provide a choice of speeds from 1 revolution per second to 1 revolution per hour.

• Features -
• Torque range 3Nm to 90Nm
• Optional clutch on W01 series
• Long life up to 10,000 hrs @ full rating
• Choice of standard gear ratios from 25:3 to 500:1

• Typical Applications -
• Timers
• Peristaltic Pumps
• Rotating displays
• CCTV ancillary drives
• Control valve actuation
• Medical & scientific fixed speed drives

Fiber W01 and W02 Gearboxes fitted with the Fiber M51 and M52 series reversible AC Synchronous Motors result in low cost geared motors with rated torque up to 90Ncm. Standard gear ratios provide a choice of speeds from 1 revolution per second to 1 revolution per hour.

• Features -
• Torque range 8Nm to 90Nm
• Freewheel option on W01 series
• Self lubricating low noise gearing
• Long life up to 10,000 hrs @ full rating
• Choice of standard gear ratios from 25:3 to 500:1

The P5 series of AC synchronous motors utilise two coils and an external phasing capacitor to enable the direction of rotation to be electrically controlled. The 12 pole motor design provides low fixed speed operation with the consequential benefit of low operating noise and smooth rotation at a constant speed, synchronous with the mains supply frequency. Choice of standard gear ratios for output speeds of 1 revolution per second to 1 revolution per hour at torques up to 100Ncm.

• Features -
• Integral clutch option
• Integral freewheel option
• Torque range 1.2Ncm to 100Ncm
• 17 standard gear ratios from 25:6 to 15,000:1
• 24Vac, 48Vac, 110Vac and 230Vac voltage options

MRIG series of geared AC Synchronous Motors provide accurate fixed speed operation with high torque capability. The brushless nature of the AC Synchronous Motor coupled with its low speed operation provides a combination of long maintenance free life and quiet operation. Together with the high torque capacity of the MIRG gearhead it results in a unit which is ideally suited to heavy duty instrumentation or light duty industrial fixed speed drives. Direction of rotation is electrically reversible by the use of a simple switch and a phasing capacitor as shown in the data sheet connection diagram. Geared Synchronous motor combination.

• Features -
• 8 Standard ratios from 5:1 to 500:1
• Torque range from 12 to 700Ncm
• Optional sleeve bearings on output shaft
• 8mm diameter output shaft