35L048B - Tin Can Permanent Magnet Stepper Motor
Tin Can Permanent Magnet Stepper Motor
| Winding unit | 35L048B1B | 35L048B1U | 35L048B2B | 35L048B2U |
|---|---|---|---|---|
| Diameter in | 1.38 | 1.38 | 1.38 | 1.38 |
| Diameter mm | 35 | 35 | 35 | 35 |
| Operating Voltage V | 5 | 5 | 12 | 12 |
| Resistance per Phase, ± 10% Ohms | 11.0 | 11.0 | 64.0 | 64.0 |
| Inductance per Phase, typ mH | 15.0 | 7.8 | 72.0 | 40.0 |
| Rated Current per Phase A | 0.45 | 0.45 | 0.19 | 0.19 |
| Holding Torque, Min mNm | 28.0 | 25.0 | 28.0 | 25.0 |
| Holding Torque, Min oz-in | 4.0 | 3.5 | 4.0 | 3.5 |
| Detent Torque, Max mNm | 4.2 | 4.2 | 4.2 | 4.2 |
| Detent Torque, Max oz-in | 0.6 | 0.6 | 0.6 | 0.6 |
| Rotor Inertia gcm² | 4.00 | 4.00 | 4.00 | 4.00 |
| Rotor Inertia oz-in² | 0.021 | 0.021 | 0.021 | 0.021 |
| Step Angle degree | 7.5 | 7.5 | 7.5 | 7.5 |
| Absolute accuracy 2 ph. On, Full step mode degree | +/- .5 | +/- .5 | +/- .5 | +/- .5 |
| Steps per Revolution | 48 | 48 | 48 | 48 |
| Ambient working temperature range C | -20 to +70 | -20 to +70 | -20 to +70 | -20 to +70 |
| Ambient working temperature range F | -4 to +158 | -4 to +158 | -4 to +158 | -4 to +158 |
| Maximum Coil Temperature °C | 130 | 130 | 130 | 130 |
| Maximum Coil Temperature °F | 266 | 266 | 266 | 266 |
| Bearing Type | Sintered Bronze Sleeve | Sintered Bronze Sleeve | Sintered Bronze Sleeve | Sintered Bronze Sleeve |
| Insulation Resistance at 500 VDC Mohms | 100 | 100 | 100 | 100 |
| Dielectric Withstanding Voltage VAC | 650 for 2 seconds | 650 for 2 seconds | 650 for 2 seconds | 650 for 2 seconds |
| Weight g | 88.0 | 88.0 | 88.0 | 88.0 |
| Weight oz | 3.1 | 3.1 | 3.1 | 3.1 |
| Leadwire | AWG 26, UL 1430 | AWG 26, UL 1430 | AWG 26, UL 1430 | AWG 26, UL 1430 |
